| GENERAL SPECIFICATIONS | ||
| DM2600 | ||
| VHF | UHF 1 | |
| Channel Capacity | 160 | |
| Typical RF Output Low Power
High Power |
1-25 W 25-45 W |
1-25 W 25-40 W |
| Frequency | 136-174 MHz | 403-470 MHz |
| Dimensions (H x W x L) | 44 x 169 x 134 mm | |
| Weight | 1.3 kg | |
| Operating Voltage | 10.8-15.6 VDC, 13.2 VDC Nominal | |
| Current Drain Standby
Rx @ Rated Audio Transmit |
0.81 A max 2 A max 1-25 W: 11.0 A max / 25-45 W: 14.5 A max |
0.81 A max 2 A max 1-25 W: 11.0 A max / 25-40 W: 14.5 A max |
| RECEIVER | ||
| Frequency | 136-174 MHz | 403-470 MHz |
| Channel Spacing | 12.5 kHz / 20 kHz / 25 kHz | |
| Frequency Stability (-30°C, +60°C, +25°C Ref) | ± 0.5 ppm | |
| Analogue Sensitivity | 0.3 uV (12 dB SINAD)
0.22 uV (typical) (12 dB SINAD) 0.4 uV (20 dB SINAD) |
|
| Digital Sensitivity | 0.25 uV (5% BER)
0.19 uV (typical) (5% BER) |
|
| Intermodulation | 65 dB | |
| Adjacent Channel Selectivity | 60 dB @ 12.5 kHz
70 dB @ 20/25 kHz |
60 dB @ 12.5 kHz
70 dB @ 20/25 kHz |
| Spurious Rejection | 70 dB | |
| Rated Audio | 4 W (Internal)
7.5 W (External – 8 ohms) 13 W (External – 4 ohms) |
|
| Audio Distortion @ Rated Audio | 3% (typical) | |
| Hum and Noise | -40 dB @ 12.5 kHz
-45 dB @ 20/25 kHz |
|
| Audio Response | +1, -3 dB | |
| Conducted Spurious Emissions | -57 dBm | |
| TRANSMITTER | ||
| Frequency | 136-174 MHz | 403-470 MHz |
| Channel Spacing | 12.5 kHz / 20 kHz / 25 kHz | |
| Frequency Stability (-30°C, +60°C, +25°C Ref) | ± 0.5 ppm | |
| Low Power Output | 1-25 W | |
| High Power Output | 25-45 W | 25-40 W |
| Modulation Limiting | ± 2.5 kHz @ 12.5 kHz
± 4.0 kHz @ 20 kHz ± 5.0 kHz @ 25 kHz |
|
| FM Hum and Noise | -40 dB @ 12.5 kHz
-45 dB @ 20/25 kHz |
|
| Conducted / Radiated Emission | -36 dBm < 1 GHz
-30 dBm > 1 GHz |
|
| Adjacent Channel Power | 60 dB @ 12.5 kHz
70 dB @ 20/25 kHz |
|
| Audio Response | +1, -3 dB | |
| Audio Distortion | 3% | |
| Digital Vocoder Type | AMBE +2™ | |
| Digital Protocol | ETSI TS 102 361-1, -2, -3 | |
Reviews
There are no reviews yet.